DUUHNN Rechargeable Battery Powered WiFi Camera 1080P Stanby 6Months

1080P DUUHNN Indoor Wifi Security Camera Battery Powered standby 6Months.  

  • Brand:

  • Item NO.:

  • Product Origin:

  • Shipping Port:

  • Custom Service:


DUUHNN Waterproof Outdoor/Indoor Battery Powered Wifi Security Camera PIR Alarm Two Way Audio Night Vision Wireless Surveillance IP Camera Suitable for Home/Office/Pet Room/Warehouse etc

Main Features

1.Outdoor WiFi CCTV Camera with built-in rechargeable battery, can charge via USB port, 100% wire free, no need to run any wire and no worry about the power of the camera

2. Adapt low consumption technology,long standby time.

3. Built-in PIR body detecting sensor,the camera will push alarm message when detect body or animal.

4.Support wifi mode for connection(support 2.4G Wifi network, not support 5G wifi)

5. Storage:Support up to 128G SD Card(SD card is not included),and include free rolling 30 days cloud storage

6.Battery: 5200mAh/6700mAh (optional, this price based on 5200mAh battery)

7.Battery life:Assume that 20 10-second videos are recorded every day. The battery can be used for 3-6 months.

8.Punch-free,Easy to install and use, ABS material

9.Camera Gross Weight:about 700g, Size:84mm*62mm*92.5mm (bracket size is excluded)

Technical Parameter

Master ProcessorSOCARM
Image SensorSensor1/2.9"color CMOS Sensor
LensM12, f: 3.3mm, F2.0, 200万
Visual AngleH (horizontal) 95 degrees; V (vertical) 55 degrees; D (diagonal) 110 degrees
Minimum Illumination0.01Lux
AudioInput/OutputTwo-way voice intercom available (built-in microphone and speaker)
Audio Compressing MethodAAC
VideoVideo Compressing MethodH.264/H.265
Lighting Frequency50Hz, 60Hz
Image Frame Rate15fps
Maximum Image Resolution1920*1080P
Light Source for Night Vision8 low-power infrared lamps or 2 medium-power infrared lamps are optional(850nM in wavelength) / White light is optional
NetworkWireless Network2.4G Wi-Fi(IEEE802.11b/g/n), built-in antenna
IP Address SupportedDynamic IP address supported
AIIntelligent FeaturesSupport human shape detection, vehicle detection, pet capture, package detection
Alarm MethodsAlarm NotificationAlarm push by mobile APP,white light  flashing and alarm sound
Wake-upWake-up MethodPIR body induction wake-up, and remote positive wake-up
Video RecordingRecording MethodAlarm triggered recording, and manual recording
Video StorageCloud storage, local MICRO SD card, and mobile phone memory
Indicator LampsLED IndicatorRGB tri-color lamp indicating the status of power/network signal/functionality
BatteryCapacity5200mAh/6700mAh (optional)
Battery Life6 months (provided that 20 10s videos are recorded per day)
Standby TimeStandby Time
Charging VoltageDV 5V+-5%/1.5A
Charge TimeWithin 10 hours
Protection MethodIP65 resistance to dust and water; over-current/over-discharge/over-charge/short circuit/charging protection at high & low temperatures
Power ConsumptionTurn off power0.32mW(4V 80μA)
Standby Power Consumption1.68mW(4V 0.35mA)
Power Consumption of Daytime Operation0.98W(4V 246mA)
Connected to the InternetPull open distance200M
InterfacesPower SupplyMICRO USB interface,Compatible with Type C interface
SD Cardup to 128GB supported
Keys1 on/off key and 1 Reset key
Installation MethodInstallation Method1/4 universal screw bracket is supported on the back and bottom
EnvironmentDustproof and WaterproofIP65
Operating Environment-10° ~ 45°C /0% ~ 80% (no condensation)
Storage Environment-20°C ~ 60° /0% ~ 90%(no condensation)
SpecificationsSize (LxWxH)67mm*58mm*89mm(with bracket excluded)
Material +Process、ColorPC、White with high gloss
CertificationsCertificateCE, FCC, RoHS, WEEE, MSDS, UN38.3, UL62368, BattG

Packing List:

- Camera * 1

- Magnetic Bracket* 1 

- USB Cable * 1 

- Manual * 1 

- Mounting Kit * 1

Carton Info:

- 30 PCS / Master carton

- Carton size: 63*37.5*29 CM

- Gross Weight: 15KG


Q1: How to set up the camera?

A1: Set up the camera 

1) Click the "Add Camera Now" in the App and enter the Wi-Fi network  name and password that you want the camera to connect. To ensure  a longer distance connection, the camera only supports the 2.4Ghz  Wi-Fi with stronger wall penetration capability and does not support  Wi-Fi for enterprise-level authentication currently. Please ensure that  the entered Wi-Fi meets the requirements. After completion, click  "Continue" to generate the QR code for pairing the camera.

2) After pressing the camera switch for 3 seconds, the camera will turn  on. At this moment, target the camera at the QR code of the mobile App,  with a distance of about 20cm (about 7 inches) until the camera emits a  "Di" sound, which represents the scanning is succeeded and the pairing  is started.

3) After a while, the camera will give out a prompt sound of a successful  connection. At this moment, please set the name for the device on  the App and select the location you want to place the device. Click  "Continue" to complete the pairing.

Q2: What is Possible problems with binding?

A2:  Maybe the following reasons cause so:

1)When you hear the "Wi-Fi Password Error", please check whether  the Wi-Fi password you entered in the App is correct; 

2) When you hear the "Authentication error", please ensure that  your Wi-Fi network is not an enterprise-level network, and the  device supports only the network with the security level below  WPA-2; 

3) When you hear the "Wi-Fi not found", please check whether you  select or enter the correct Wi-Fi name, and place the device near  the Wi-Fi router and ensure that the router is powered on. Please  note that 5Ghz Wi-Fi cannot be searched by the device; 

4) When you hear the "Retrieving IP timeout", it indicates that  the number of devices connected to the router in your home is  too many to connect more devices. Please remove some of the  connected devices that are not commonly used or restart the  router to clear the unconnected devices. You may need to contact  the router administrator; 

5) When you hear the "Cloud service connection fail", please check  whether your router is connected properly to the external network.  When you hear this error prompt,it is common on the condition of  network disconnection or that the selected router in your home  is a local area network server. Please ensure that the network  connection is normal, and try to temporarily turn off the firewall to  connect again.

Q3: How to Install the camera?

A3: install it on a wall to use. 

1) Select a good spot for your camera Select a good spot for your camera, please install the camera in a  position where its view is not blocked and ensure that it is within the  coverage of the Wi-Fi network.

2) Install the bracket

Screw fixing: Use the drilling tool to punch holes on the wall according to the hole  distance of the base. It is recommended to mark the holes on the wall  with a pencil before drilling. Screw the expansion nut into the holes on  the wall, and then connect the bracket to the expansion nut with screws  to complete the fixing.

Fix the camera

Align the bracket screw with the screw hole on the back or bottom of th e camera, and then rotate it to the tightened state.

Adjust the angle

Adjust the camera to an appropriate angle, and then tighten the base  by rotating it in clockwise direction to fix the angle.

Q4: How to Share the camera?

A4: When you need to view the camera with other family members or  friends, you can use this function. Only the administrator whose  account is bound with the camera for the first time can share and set  the device. Other members can only view the live or playbacks of the  device. 

1) Find the camera you want to share on the App homepage or camera  setting page. Find the button and enter the sharing page.

2) Click "Invite", and a QR code will be generated for sharing. 

3) For the members you need to share, find "Add a Friend’s Camera" in  the "User" page to enter the scanning page.

4) Scan the QR code on your mobile phone, and you will receive the  confirmation notification after success. The sharing will be completed  after you agree.

Q5: How to Charge the camera?

A5: App will remind you to charge your camera when the battery is low.  Please use the Micro USB cable to plug into the 5V/1.5A charging  adapter to charge the camera. During charging, the camera's indicator  light is solid yellow, and when the camera is fully charged, the indicator  light will turn into solid green. It will take 10 hours to fully charge the  camera.

Q6: What is the Indicator light status mean?

A6: The indicator lights means:

Light StutasMode
BlueWorking mode
OffSleep mode
YellowCharging mode
GreenFully charged mode

DUUHNN Customization Service:

  1. OEM customer Logo on camera/packing box/user manual etc;

  2. If mass quantity each month, we can open new appearance mode for you for free, as EXCLUSIVE AGENT;

  3. Custom your APP name if quantity arrive our target demands.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related Products
Fake Solar House Security Cameras
Fake Dummy House Security Cameras Solar Powered
The Fake Dummy Security Camera Solar Powered for Outside with light working. There is one Remote Control optional to make light working at three different modes.
China Fake Security Cameras
Fake Surveillance Camera Solar Powered with Wall Light
Solar Charging Fake Dummy Camera is economic for outdoor garden. No wiring and easy installation, motion detect light working modes is smart when somebody move nearby.
Battery Powered 4G CCTV Camera Factory
China Battery Operated CCTV Camera with SIM Card
This Battery Operated CCTV Camera with SIM Card standby up to 500days. 4G Mini Camera support motion detection and alarm message push to your phone. 
WiFi Mini Camera HD 1080P Security Cam
Mini Battery Operated CCTV Camera with SIM Card
Battery Operated CCTV Camera with SD card sport and night version. HD Mini Security Camera Battery Operated Support power bank to charge working. Suitable for baby monitor and video conference.
China Floodlight Camera Security Camera CCTV
Floodlight Camera Smart WiFi Security Camera CCTV
Floodlight Camera Security CCTV supports Two way voice talk, Multi-platform compatible, WiFi and Day night vision. Automatically tracing object
Spy Finder Hidden Camera Detector Wholesale
Anti Spy Hidden Camera Detector Bug Detector Scanner
Spy Finder Hidden Camera Detector built in battery and light weight to carry and protect our private.
Battery Powered Wireless Security Camera System With Memory Card
Battery Operated Wireless Security Camera Kit with Memory Card
Battery Powered Wireless Security Camera System With Memory Card and Smarphone APP,180 days battery life rechargeable each time.
Pan Tilt Outdoor Security Camera
DUUHNN 2.5Inch HD 3MP Pan Tilt Outdoor Wifi Camera
Pan Tilt Wifi Camera 2.5inch with night version. HD 3MP 2304×1296P high resolution with fixed lens at cheap price. 

click here to leave a message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.